高温泵是利用永磁联轴器工作原理和无接触的传递扭矩而制造的新型齿轮泵,因为工作原理是利用磁的特性,所以也称磁力泵,高温磁力泵。当原动机带动外磁钢转子时,通过磁力的作用驱动内磁钢转子同步旋转,然后利用内磁钢转子和叶轮连成一体,以达到无接触带动叶轮转动得目的。由于液体被封闭在静止的隔离套内,所以高温泵是一种全封闭、无泄漏的泵型,因此_杜绝了机械密封离心泵不可避免的跑油、冒油、滴油、漏油的缺点。
高温泵的过流部件采用不锈钢制成,广泛应用于电镀、化工、制药、石油、国防等、环保、水处理部门,是输送易燃、易爆、有毒和贵重液体的理想设备,是创建无泄漏、_文明车间的_选择.
Over-current heat pump components are made of stainless steel is widely used in electroplating, chemical, pharmaceutical, petroleum, national defense, environmental protection, water treatment sector, the transportation of flammable, explosive, toxic and precious liquids ideal equipment, is to create a No leakage, pollution-free shop the best choice of civilization
高温泵的正常适用温度为100度以内,如果需输送高温介质,可定做为高温型,适用温度可以在200度以内,高温泵也可定做带保温夹套对输送的高温介质进行保温。
The normal application of heat pump temperature of 100 degrees or less, if the required heat transfer medium, can be customized for high temperature, suitable temperature can be less than 200 degrees can also be customized with a thermal insulation jacket of the transmission medium for high-temperature insulation.
高温泵的结构特点:由泵体、齿轮、轴承座、安全阀、轴承及密封装置组成的卧式回转泵。泵体、泵盖、轴承座为灰铁铸件,齿轮用_钢材制造;密封腔内装有轴向密封。也有
高温泵采用柔性石墨或机械密封.
The structural characteristics of heat pumps:From the pump, gear, bearing seats, valve, bearing and seal unit with horizontal rotary pumps. Pump, pump cover, bearing the gray iron castings, gear to use high-quality steel manufacturing; sealed chamber with axial seal. There is also flexible graphite or mechanical seal.