双螺杆泵新测试已完成

据了解，高压海底设备专用双螺杆泵的工厂测试于3月24日由福斯和壳牌完成。It is understood that special twin-screw high-voltage subsea equipment factory tests on March 24 by Fox and Shell complete
大型海底深水泵系统的组成部分之一_包含福斯高升压海底多相泵（之前由壳牌美洲公司赞助） ，在重油设备中有所应用大型海底深水泵系统。Large-scale submarine deep-water pump system, an integral part of the high step-up with Fox seabed multiphase pumps (previously sponsored by the Shell Company of America), heavy equipment has been applied in large-scale submarine deep water pump system.
此项目中双螺杆泵，压差可以达到2500psi。输送介质的粘稠度范围是2cp~2,000cp。在额定转速1,800转的情况下，福斯双螺杆泵可根据高压的需要，每日完成约90000桶的输送。对于3000psi压力、电源5兆瓦、3000米水深的工况也可在该泵系统的其他设计下完成应用。This project, twin-screw pump, pressure up to 2500psi. Transmission medium viscosity range 2cp ~ 2,000 cp. At the rated speed of 1,800 rpm, the Fox high-pressure twin-screw pump according to the needs of about 90,000 barrels a day to complete the delivery. For the 3000psi pressure, power 5 MW, 3,000 meters water depth conditions may also be other design of the pump system, complete the application.
到2010年年末，在福斯位于荷兰埃滕弗勒尔的高功率测试中心将会进行对其核心技术的完整测试。  The end of 2010, at Fox high power at Helanaiteng Fleur Test Center will conduct a full test of its core technology.